Jump to content

Log in or register to remove this advert

greenmech 130


percy verance
 Share

Recommended Posts

Took my arborist 130 in for a service a few months ago and since then every time the anti stress kicks in the feed rollers don't just stop, they go into reverse briefly, which quite often spits the brash back out meaning you've constantly got to stand by it feeding the brash back in.

 

I'm not sure if it was something that was changed during the service or it is just a coincidence that it started doing it after. Has anyone any ideas what it might be?

Link to comment
Share on other sites

Log in or register to remove this advert

Took my arborist 130 in for a service a few months ago and since then every time the anti stress kicks in the feed rollers don't just stop, they go into reverse briefly, which quite often spits the brash back out meaning you've constantly got to stand by it feeding the brash back in.

 

I'm not sure if it was something that was changed during the service or it is just a coincidence that it started doing it after. Has anyone any ideas what it might be?

 

A Percy What year is it and are they vertical or horizontal rollers?

Link to comment
Share on other sites

Percy..

The kick back needs adjusting and it's a five minute job..:001_smile:

The junction box is mounted behind the battery, you'll need to remove the four screws holding the lid on (it's a white square box ), once the lid is removed look for a small adjustable 'blue' potentiometer in the centre of the circuit board.

Using a small flat bladed screwdriver carefully turn the screw very slightly anti-clockwise to reduce the kick back or clockwise to increase it......

It's very sensitive so will probably take a few attempts to get it spot on.

Also it's better to adjust it with warm hydraulic oil as the kickback increases slightly as the oil temperature increases...

Jase.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.