Jump to content

Log in or register to remove this advert

Tp 200 pto chipper


mark hooper
 Share

Recommended Posts

Log in or register to remove this advert

Fantastic chippers, used one for 5 years on unimog u1000 and aside from blade sharpening it never went wrong. Then I bought one myself to run off a 70hp tractor which was a good combo even at the lower HP. On both the ones I used you had to use the stop bar with large timber as it had no no-stress control- brash was rarely a problem even with 70hp. Beautifully basic chippers - parts were fairly dear when I needed to repair my own once but shouldn't happen too often with good servicing.

Edited by Matthew Storrs
Link to comment
Share on other sites

We have a very old tp 860 we brought cheap to do a woodland job on our 95 hp tractor. Considering it was not well loved by the previous owner it has proved very good with little work (sharpening rollers, new anvil, few parts for pto clutch) all self contained hydraulics, would imagine the newer models are even better, certainly very pleased with ours now

Link to comment
Share on other sites

We have a very old tp 860 we brought cheap to do a woodland job on our 95 hp tractor. Considering it was not well loved by the previous owner it has proved very good with little work (sharpening rollers, new anvil, few parts for pto clutch) all self contained hydraulics, would imagine the newer models are even better, certainly very pleased with ours now

 

The older chippers are more simple has they don't have the Stress control so no need for electrics etc, I have a 16 year old Jenson and very little to it .

 

 

Ste

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.