Jump to content

Log in or register to remove this advert

Quick and easy chip box


Steve Bullman
 Share

Recommended Posts

I dont have a chip box on my truck nor intend to have one built as I dont often need one, on the odd occassion i do i get by. I have a job this week where it would be handy to get more chip on and want to knock up something cheap and easy to use. My idea is 3 sheets of ply cut to the same length(the width of the bulk head)and fixed together with hinges. very crude but at least they should stand up on their own whilst theres no chips holding them up. If anyone has any suggestions to make this better please let me know

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Many years ago i used to use three sheets of ply,i had two uncut 8' by 4' down each side,it was a ldv,and the third sheet was a tight fit between the other two,i also put a ratchet strap up and over half way down to hold every thing in place.

Did not look very pro,but did the job:icon14:

Link to comment
Share on other sites

Many years ago i used to use three sheets of ply,i had two uncut 8' by 4' down each side,it was a ldv,and the third sheet was a tight fit between the other two,i also put a ratchet strap up and over half way down to hold every thing in place.

Did not look very pro,but did the job:icon14:

 

Ditto, i wouldn't bother with hinges steve as stuff gets caught on them and they only get broken. :):icon14:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.