Jump to content

Log in or register to remove this advert

Nifty fuel/water test


aspenarb
 Share

Recommended Posts

I was given a tube of this gear to try out, it is specifically for testing tanks for water residue. Smear some on a dipstick and just dunk it in the tank, the presence of water turns the paste red . Available from here https://www.oilybits.com/water-removal/kolor-kut-water-finding-paste/prod_149.html

 

Smear a bit on a stick.

 

image.jpg1_zpskvuyr3ty.jpg

 

test bottle with water/diesel

 

image.jpg2_zpsw8dv3wek.jpg

 

It shows the exact amount of water so you can tell how much is at the bottom.

 

image.jpg3_zpsmemtfkgf.jpg

Link to comment
Share on other sites

Log in or register to remove this advert

does the shade change or does it just turn red

 

The paste turns red on contact with water only and not affected by diesel so just need a smear on the stick for a few inches and push to the bottom of the tank or barrel. Its does not creep either , I measured the water in the bottle and it was exactly the same as the red mark on the stick so its pretty accurate.

 

Bob

Link to comment
Share on other sites

Would this work in engine oil to see if water/antifreeze mix was in the sump as I'm having problems with liquid in the oil and can't tell if it's diesel or water because it's not the usually grey colour. Thanks

 

use a clean glass jar get the engine warm then drain a small amount of oil thru the sump plug leave out in the cold and if there is condensation in the top of the jar its almost certainly water or take an oil sample and send it to a lab most large oil companies can do this

Link to comment
Share on other sites

  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.