Jump to content

Log in or register to remove this advert

TP 200 PTO- please help.


Matthew Storrs
 Share

Recommended Posts

OK, I purchased a TP200 a few months back buying blind (very bad idea:thumbdown:). So its been at the local chipper mechanics for the last month sorting leaking hydraulic motors and VERY slow/gutless roller speed intake.

Got it back today, firstly running in 540 rpm speed, the roller are still quite slow although much better then when I first got it, in 1000rpm speed, the rollers are flying round. So which speed should it run on?

 

Second problem - after about 6 branches the chipper failed to throw the chips out subsequently blocking the shoot. Any ideas why this could happen? :confused1:

 

Thanks very much for any help:001_smile:

Link to comment
Share on other sites

Log in or register to remove this advert

TP200PH runs 540-1000 r/min and requires 40-80hp (owners manual specs).

Is the roller speed not adjustable - should be a flow valve on the side? I know it is on the 150 road tow i have.

 

I can email you a few pages of the manual later if you want, or give Mark a call over at AT Osbourne.

 

Regards,

 

Steve.

Link to comment
Share on other sites

Cheers for help guys. As far as I can tell it runs fine in 1000 and I can adjust the roller speed from very fast to stop so that's all fine. But the chipper mechanic said the chipper wasn't meant to run at 1000 so obviously I tried it in 540 and that seems to be very sluggish and of course shoot blocking. Out of interest has anyone run a tp200 successfully in 540?

Blades are super sharp- they've just been sharpened by Atkinson Vos.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.