Jump to content

Log in or register to remove this advert

my 190 is death...


KGmyrek
 Share

Recommended Posts

Hi, my lovely wood chipper is broken...

engine don't want to start, all lamps are Ok, ignition is Ok, but then engine just stop.

I think that I have a problem with Speed Switch(Woodward EPS 1000), on channel 2 is red lamp burning, stop button, and others sensors are working correct.

 

I'm in deep s..... in PL I don't have a Timberwolf service, what I should to do.

 

Any idea?

Link to comment
Share on other sites

Log in or register to remove this advert

Hi KGmyrek

Sorry to hear of your chipper problem, The Kubota engine fitted to your chipper has a fuel shut off solenoid fitted at the rear of the diesel injector pump which controls the supply of fuel to the engine. This solenoid has 2 coils fitted within it.

Coil 1 (pull) electrical supply comes via the crank position of the ignition switch which allows the engine to fire up. Coil 2 (hold) electrical supply comes via the EPS1000 from terminal 17 this takes over from Coil 1 once the ignition switch is returned to the ignition on position.

You may have a problem with the EPS1000 which could require changing or it may be asociated with the water temperature or oil pressure circuits.

Your local Timberwolf dealer should be able to help you test this, or advise if the problem is elsewhere. you can find your nearest Timberwolf dealer by looking at the website Timberwolf UK | Introduction

Hope this helps

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.