Jump to content

Log in or register to remove this advert

200t


basilbrush
 Share

Recommended Posts

Ok, I have just referb my old 200t total strip down and rebuild . The reason for this is it has developed a running fault, runs lumpy until you blip the throttle then at full revs runs fine come off the throttle and it bogs down, few more revs then its ok again. I found the crank case seals leaking so replaced these , the local stihl supplier set up the carb and it ran sweet every time I used it until it sat unused for about 2weeks. Yep started first time then same fault. It seems to get better after it has been running for about 20 mins ??

Can any one has any one had a similar fault ,or can some one suggest anything.

Thanks for reading .

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 32
  • Created
  • Last Reply

Top Posters In This Topic

No checked the impulse line and getting good compression even changed the fuel cap o ring ....

 

Did not mean the piston of the engine . There is a small piston in the carb that acts as an accelerator pump when you first squeeze the throttle . If this plays up it can cause erratic running symptoms . You can mod it to do away with this with an earlier type of carb that did not have this feature .

Link to comment
Share on other sites

Yeah so do I , iv spent all day rebuilding it to still have the same fault.. iv got the new 201 and yes its a good saw but well you know the 200 is just great !

 

I don' get in trees any more as I'm 64 ! . I have a modded Husqvarna T540 ( its a Mk 1 but has the Mk 2 mods to it and that is a flyer . If your 201 is not the latest cm you can get the Stihl " enhancement " kit ( new fly wheel , ignition module and other stuff ) for about £ 60 . This helps a great deal . Good luck with the ms200 . They are a dying breed !

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.