Jump to content

Log in or register to remove this advert

Echo cs501sx siezed!


Chris Day
 Share

Recommended Posts

I have loads of echo kit and until now none of it has put a foot wrong. The 501sx is seven months old and is running on the same mix as everything else (50:1 with stihl hp super green variety oil). The saw just stopped having drunk a litre of the same mix at least and the other kit continues to work. The saw is in the shop as it's under warranty, the pot and piston are scored both sides.

 

As I refuse to blame the mix, good quality fuel, good quality oil, fresh mix same stuff as everything is running on with no upset. So what caused this? I'm guessing a small air leak?

 

Hope this doesn't ruin my love affair with echo as I've fallen out with husky and stihl apart from their big saws!

Link to comment
Share on other sites

Log in or register to remove this advert

  • Replies 29
  • Created
  • Last Reply

Top Posters In This Topic

Could be a number of things, air leak, split fuel hose, foreign object such as bearing break up, incorrect carb setting. All will be clear to the guy who will have to repair it as long as they know what there doing. As I'm sure you know saws just don't seize for no reason and the evidence will be evident for a competent person.

Link to comment
Share on other sites

I have worked on, and traded for, many Echo chainsaws where warranty was denied with same conditions you have described.

So much for their five year warranty!

I consider ANY WARRANTY to be of little value since ALL are written to protect manufacturer--not consumer!

Many ways warranty can be denied.

Link to comment
Share on other sites

Thanks, you're coming up with the same answers as I did. We shall see what echo uk say and do about it.

 

 

Overheating the saw can also cause the piston to score and seize.

 

We have only ever had x1 echo warranty - and it was fixed no quibble under warranty.

Link to comment
Share on other sites

Out of question as all of the equipment must be re-tuned by dealers. Factory setting is perfectly set for pure petrol but manufacturer mandates re-tuning in ethanol-rich-and-varying-EU.

 

Oh . Right . Silly me as they all must do of course :001_smile:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share


  •  

  • Featured Adverts

About

Arbtalk.co.uk is a hub for the arboriculture industry in the UK.  
If you're just starting out and you need business, equipment, tech or training support you're in the right place.  If you've done it, made it, got a van load of oily t-shirts and have decided to give something back by sharing your knowledge or wisdom,  then you're welcome too.
If you would like to contribute to making this industry more effective and safe then welcome.
Just like a living tree, it'll always be a work in progress.
Please have a look around, sign up, share and contribute the best you have.

See you inside.

The Arbtalk Team

Follow us

×
×
  • Create New...

Important Information

We have placed cookies on your device to help make this website better. You can adjust your cookie settings, otherwise we'll assume you're okay to continue.