Unimog 3 point linkage ram

[Jonny Burch]

The U bolts on one of the rams decided to give up the other day and I'd like to get both rams serviced/replaced as there has been issues with these before.

 

Could anyone tell me where I might be able to source a new pair please?

 

Many thanks

 

Jonny

 

 

Sent from my iPhone using Arbtalk

[agrimog]

there are diffrent types and sizes depending on what age and model of mog.....,any good hydraulic place should be able top refurb them

[Jonny Burch]

Nice one!

 

Just been quoted £52.50 plus vat for a u bolt!!

 

 

Sent from my iPhone using Arbtalk

[Mike Hill]

Whats wrong with the Rams?

 

A new set of seals are not very dear.Most hydraulic shops could replace them for you for not much money,or you could do it yourself with some simple tools.

 

Vice,pipe wrench,something to pick the seals out like a smal screw driver.

[PeteB]

Nice one!

 

Just been quoted £52.50 plus vat for a u bolt!!

 

 

Sent from my iPhone using Arbtalk

 

The joys of Mog ownership! I asked a supplier in Tewkesbury to supply mine with the upright exhaust, his version fell off quickly and a genuine one from a Mercedes commercial place was £900+vat just for the stench pipe and guard. The silencer had to be cut/shut as it was too complicated and expensive to order the correct unit.

 

As Mike says, they are only hydraulic pistons and your good local Ag engineer should sort this.

Edited April 25, 2017 by PeteB

[Jonny Burch]

Got one of the ram pins out but ram with the broken u bolts pin won't budge!!

 

Luckily there's 2 places nearby that can repair rams

 

Been a good day otherwise....

 

 

Not! Lol

 

 

Sent from my iPhone using Arbtalk

[Mike Hill]

Are you having trouble getting the Pin out that holds the ram in place or the pin that works the linkage?

[aspenarb]

Got one of the ram pins out but ram with the broken u bolts pin won't budge!!

 

Luckily there's 2 places nearby that can repair rams

 

Been a good day otherwise....

 

 

Not! Lol

 

 

Sent from my iPhone using Arbtalk

 

What have you broken now JB?

 

Bob

[TIMON]

Got one of the ram pins out but ram with the broken u bolts pin won't budge!!

 

Luckily there's 2 places nearby that can repair rams

 

Been a good day otherwise....

 

 

Not! Lol

 

 

Sent from my iPhone using Arbtalk

 

 

Jonny... is it me or is that ram slightly bent? If it is it would explain a lot..

 

 

 

Timon.

[Jonny Burch]

Are you having trouble getting the Pin out that holds the ram in place or the pin that works the linkage?

 

 

Hi Mike

 

The pin that's on the piston end

 

 

Sent from my iPhone using Arbtalk